[isf-wifidog] Help with OpenWRT

[Rajendra Jagad]

Yea two things make sure the version matches your Linksys Hardware/firmware
version. 2nd.. After upgrade of firmware is complete, Even if you can pull
up the OpenWRT page by putting the Routers LAN IP in the browswer. Reboot is
must because it will not allow you to save configure changes.

On 8/22/06, Kenneth Craft <kenny at craftbros.com> wrote:
>
>  Thats the one I used. hmmm. I'll reflash and see if that fixes it.
>
> Thanks
>
>
>  ------------------------------
> *From:* wifidog-bounces at listes.ilesansfil.org [mailto:
> wifidog-bounces at listes.ilesansfil.org] *On Behalf Of *Rajendra Jagad
> *Sent:* Tuesday, August 22, 2006 11:13 PM
> *To:* WiFiDog Captive Portal
> *Subject:* Re: [isf-wifidog] Help with OpenWRT
>
>
>  If your referring to RC5 it is here
> http://downloads.openwrt.org/whiterussian/rc5/bin/ You do I install it and
> the install was smooth on the Linksys WRT54G V4 make sure you download the
> correct version of the linksys.. This is a bin package and not ipkg package.
>
> Just upgrade the firmware and browse to the bin file you downloaded. Do
> not interupt while upload of firmware. Then power of the linksys and power
> back on. Browse using the IP address of the linksys that you had before the
> firmware upgrade and you find all the setting and IP address show up just
> fine even the SSID is save. OOOH I forgot you have to create a new password
> first. Then click on Save changes, Then Click on Apply changes. Make sure it
> save the password file The password must be Capital Letter, number and 5
> digit log. If you wish to take a look at from the commandline download
> putty.ext and SSH into it login as root with the password you just
> created. port 22 and IP address. and It should drop you right into the
> Terminal Window. you can ls and see all the the linux directories.
>
> I hope this helps.
>
> Raj
>
>
>
> On 8/21/06, François Proulx <fproulx at edito.qc.ca> wrote:
> >
> >  Huh. Well are you probably looking for a binary version.
> >
> > The only one I'm aware of is available here.
> > http://ilesansfil.org/dist/wifidog/bin/openwrt/
> >
> >  On 21-Aug-06, at 1:17 , Kenneth Craft wrote:
> >
> >   Installing another Linksys unit with Wifidog again.. however, I cannot
> > access the beta1 package using ipkg and want to use SVN to install the beta2
> > from there.. when I type svn co https:// .... It says svn: not found....
> >
> > I'm using Openwrt Whiterussian (RC5) default install....
> >
> > Any help?
> >
> > Thanks,
> >
> > KEn
> >
> >
> > --
> > Internal Virus Database is out-of-date.
> > Checked by AVG Free Edition.
> > Version: 7.1.394 / Virus Database: 268.8.3/362 - Release Date: 6/12/2006
> >  _______________________________________________
> > WiFiDog mailing list
> > WiFiDog at listes.ilesansfil.org
> > http://listes.ilesansfil.org/cgi-bin/mailman/listinfo/wifidog
> >
> >
> >
> >
> > _______________________________________________
> > WiFiDog mailing list
> > WiFiDog at listes.ilesansfil.org
> > http://listes.ilesansfil.org/cgi-bin/mailman/listinfo/wifidog
> >
> >
>
> --
> Internal Virus Database is out-of-date.
> Checked by AVG Free Edition.
> Version: 7.1.394 / Virus Database: 268.8.3/362 - Release Date: 6/12/2006
>
>
> --
> Internal Virus Database is out-of-date.
> Checked by AVG Free Edition.
> Version: 7.1.394 / Virus Database: 268.8.3/362 - Release Date: 6/12/2006
>
> _______________________________________________
> WiFiDog mailing list
> WiFiDog at listes.ilesansfil.org
> http://listes.ilesansfil.org/cgi-bin/mailman/listinfo/wifidog
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listes.ilesansfil.org/pipermail/wifidog/attachments/20060823/4f0e7207/attachment.html