[isf-wifidog] Wifidog installation
Philippe April
isf_lists at philippeapril.com
Jeu 24 Mar 13:18:38 EST 2005
On Thu, Mar 24, 2005 at 10:03:30AM -0500, Bruno Remy wrote:
>
> Philippe April a écrit:
>
> >>a) Should I copy all this downloaded package into the /tmp dir of my
> >>Lynksys box, and then compile it with `./configure' command ?
> >>
> >>
> >
> >You can't, there's no compiler on the Linksys router, you have to
> >cross-compile it and then push the binaries.
> >
> It makes sense ! So, I can do it on my Linux box.
>
> >
> >
> >
> >>b) Should I grap it on the web (as mentionned in the on-line
> >>documentation)using :
> >>----------------
> >>cd /tmp
> >>wget http://web-site.com/wifidog.ipk
> >>ipkg install wifidog.ipk
> >>----------------
> >>In this case... what is the REAL link that I have to type instead of this
> >>generic example :
> >>"http://web-site.com/wifidog.ipk" wich is not a valid adress, obviously.
> >>
> >>
> >
> >If you used the images on www.ilesansfil.org/dist/openwrt/ to flash your
> >router, you could use our binary packages directly.
> >
> On this package I found "openwrt-g-code-v2.2.bin" but once this binary
> installed, what's next ?
> What about the Wifidog ipk in this case (without compilation)?
>
> Thanks Philippe
Since you have a non v2.2 hardware, use the openwrt-g-code.bin...
Then for the ipkg,
http://www.ilesansfil.org/dist/wifidog/wifidog_1.1.0_mipsel.ipk
--
Philippe April
GnuPG: http://key.philippeapril.com/
Skype ID: mousetrap
Plus d'informations sur la liste de diffusion WiFiDog