[isf-wifidog] iptables version

[Philippe April]

The issue you are having is that the modules wifidog compiled and put in
/usr/lib/iptables/

libipt_mark.so
libipt_mac.so
libipt_MARK.so

Haven't been compiled with the same buildroot than the one running on
the wrt54g.

Therefore, the "iptables" tool (here version 1.2.9) does not want to
work with 1.2.11 modules.

When you flashed to your new image, did you reinitialize the openwrt
partition (by running "firstboot" in failsafe)?

That's assuming you use the same buildroot sources that have been used
to compile the image running on your router.

On Tue, Mar 22, 2005 at 02:55:01PM +0200, Marios Moutzouris wrote:
>   376 root        376 S   /usr/bin/dropbear
>   384 root        420 R   vi wifidog.conf
>   385 root        540 S   ash --login
>  1056 root        504 S   wifidog -f -d 9
>  1219 root        504 S   wifidog -f -d 9
>  1220 root        504 S   wifidog -f -d 9
>  1221 root        504 S   wifidog -f -d 9
>  1222 root        504 S   wifidog -f -d 9
>  1228 root        364 R   ps -auwwx
> root at linksys:/etc# lsmod
> Module                  Size  Used by
> ipt_mac                  592   0 (unused)
> wl                    348968   1
> et                     21968   1
> diag                    2224   0 (unused)
> root at linksys:/etc#
> 
> 
> Marios
> 
> > -----Original Message-----
> > From: wifidog-bounces at listes.ilesansfil.org [mailto:wifidog-
> > bounces at listes.ilesansfil.org] On Behalf Of Mina Naguib
> > Sent: Tuesday, March 22, 2005 2:17 PM
> > To: WiFiDog Captive Portal
> > Subject: Re: [isf-wifidog] iptables version
> > 
> > -----BEGIN PGP SIGNED MESSAGE-----
> > Hash: SHA1
> > 
> > 
> > 
> > Marios Moutzouris wrote:
> > | I d/l the latest source code for wifidog. And compiled it and put it
> > | On the linksys. After authentication it says in the debug window
> > received
> > | Authentication '1' etc, but the web browser goes back to the login page.
> > I
> > | assume its because of this debug entry...
> > |
> > | "iptables: match `mark' v1.2.11 (I'm v1.2.9)"
> > |
> > | What do I need to do to get it fixed, considering I want to make some
> > | changes to the wifidog source.
> > |
> > | Thanks
> > | Marios
> > 
> > Run `lsmod`
> > 
> > If you don't see `ipt_mac` listed, then you haven't started wifidog
> > properly.
> > 
> > The correct way to run it is via the `wifidog-init` shell script which
> > will load the needed modules (at least the first time)
> > 
> > -----BEGIN PGP SIGNATURE-----
> > Version: GnuPG v1.4.1 (GNU/Linux)
> > Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org
> > 
> > iD8DBQFCQAzEeS99pGMif6wRAjTTAJ4sr2XtLJ54SXfSVh2K0u5ieXHnPwCfbVSU
> > VO1BD3d8md/G1xD3YHwd0lE=
> > =DIKc
> > -----END PGP SIGNATURE-----
> > 
> > --
> > No virus found in this incoming message.
> > Checked by AVG Anti-Virus.
> > Version: 7.0.308 / Virus Database: 266.8.0 - Release Date: 21/3/2005
> > 
> > 
> 
> -- 
> No virus found in this outgoing message.
> Checked by AVG Anti-Virus.
> Version: 7.0.308 / Virus Database: 266.8.0 - Release Date: 21/3/2005
>  
> 

> _______________________________________________
> WiFiDog mailing list
> WiFiDog at listes.ilesansfil.org
> http://listes.ilesansfil.org/cgi-bin/mailman/listinfo/wifidog

-- 
Philippe April
GnuPG: http://key.philippeapril.com/
Skype ID: mousetrap