[isf-wifidog] Redirect question

[Philippe April]

Did you run "firstboot" in failsafe to wipe what you had on your partition?

I would like to know more details. Make sure the interfaces in the
config are right, and then run:

insmod ipt_mac
wifidog -f -d 9

and forward us the details. If you have that image and that ipkg,
there's no reason why it wouldn't work.

If you want, point to our authentication server

AuthServer {
    Hostname auth.ilesansfil.org
    SSLAvailable yes
    Path /
}

That way we'll know if that's causing problem on your end.

On Thu, Mar 10, 2005 at 02:00:47PM +0200, Marios Moutzouris wrote:
> I installed the bin file. And ran the beta3. No luck.
> 
> Marios
> 
> > -----Original Message-----
> > From: wifidog-bounces at listes.ilesansfil.org [mailto:wifidog-
> > bounces at listes.ilesansfil.org] On Behalf Of Philippe April
> > Sent: Wednesday, March 09, 2005 8:57 PM
> > To: WiFiDog Captive Portal
> > Subject: Re: [isf-wifidog] Redirect question
> > 
> > Yeah but if our binaries don't fit (not same versions of iptables, etc.)
> > it won't work well.
> > 
> > If you want an image for your GS that fits with our packages:
> > 
> > http://www.philippeapril.com/openwrt/openwrt-gs-code.bin
> > 
> > Then try the wifidog ipkgs (beta3!)
> > 
> > On Wed, Mar 09, 2005 at 09:06:25AM -0800, Joe Bowser wrote:
> > > On Wed, 2005-03-09 at 09:47 -0500, Philippe April wrote:
> > > > Hmmm. Doesn't say much :)
> > > >
> > > > Is it a recent aquisition or have you had it for a little while?
> > > >
> > > > On Wed, Mar 09, 2005 at 03:41:39PM +0200, Marios Moutzouris wrote:
> > > > > Thanks.
> > > > >
> > > > > It says "Model No WRT54GS"
> > > > >
> > >
> > > This is clearly a 1.0 unit.  All original 1.0 units do not have a
> > > version number.  Basically, if you're using a GS, you should probably
> > > make sure that you have the proper firmware corresponding to WiFiDog.
> > >
> > > <shameless plug>
> > > I recommend going to http://www.infil00p.org/openwrt/snapshots/ and
> > > getting the relevant files to your version of the router (in your case,
> > > pick the v2.0 directory, since that contains the G, GS and TRX files for
> > > an OpenWRT distro, and the corresponding WiFiDog ipk.
> > >
> > > There's also a v2.2 directory for v2.2 hardware, which may or may not
> > > work with the WRT54GS v1.1 but I have yet to pick one up to test it
> > > yet.
> > > </shameless plug>
> > >
> > > There's also other files there of interest, namely just the patches that
> > > I already posted here, and on the OpenWRT forums. :)
> > >
> > > --
> > > Joe Bowser
> > > e-mail: bowserj at unbc dot ca
> > > website: http://www.infil00p.org/
> > >
> > 
> > > _______________________________________________
> > > WiFiDog mailing list
> > > WiFiDog at listes.ilesansfil.org
> > > http://listes.ilesansfil.org/cgi-bin/mailman/listinfo/wifidog
> > 
> > --
> > Philippe April
> > GnuPG: http://key.philippeapril.com/
> > Skype ID: mousetrap
> 

> _______________________________________________
> WiFiDog mailing list
> WiFiDog at listes.ilesansfil.org
> http://listes.ilesansfil.org/cgi-bin/mailman/listinfo/wifidog

-- 
Philippe April
GnuPG: http://key.philippeapril.com/
Skype ID: mousetrap