[isf-wifidog] mesh
Philippe April
isf_lists at philippeapril.com
Mer 15 Juin 12:15:37 EDT 2005
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
I don't get it, wds0.2 is supposed to have the address assigned from
wan_ variables.
How about if you assign it manually?
ifconfig wds0.2 192.168.2.2 netmask 255.255.255.0 up
Then check if you have a default gw in your routing table, if not:
route add default gw 192.168.2.1
Then try to ping 192.168.2.1 and see if you reach neuronA... and
don't forget to wl ap 1 both.
On 15-Jun-05, at 10:50 AM, Dr. Marios Moutzouris wrote:
> root at neuronB:/etc# ifconfig -a
> eth0 Link encap:Ethernet HWaddr 00:12:17:C7:95:E3
> UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1
> RX packets:547 errors:0 dropped:0 overruns:0 frame:0
> TX packets:408 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:100
> RX bytes:57555 (56.2 KiB) TX bytes:60077 (58.6 KiB)
> Interrupt:5 Base address:0x2000
>
> eth1 Link encap:Ethernet HWaddr 00:12:17:C7:95:E5
> inet addr:192.168.4.1 Bcast:192.168.4.255 Mask:
> 255.255.255.0
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:30 errors:0 dropped:0 overruns:0 frame:203
> TX packets:263 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:100
> RX bytes:1260 (1.2 KiB) TX bytes:16230 (15.8 KiB)
> Interrupt:4 Base address:0x1000
>
> lo Link encap:Local Loopback
> inet addr:127.0.0.1 Mask:255.0.0.0
> UP LOOPBACK RUNNING MTU:16436 Metric:1
> RX packets:161 errors:0 dropped:0 overruns:0 frame:0
> TX packets:161 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:0
> RX bytes:18032 (17.6 KiB) TX bytes:18032 (17.6 KiB)
>
> vlan0 Link encap:Ethernet HWaddr 00:12:17:C7:95:E3
> inet addr:192.168.3.1 Bcast:192.168.3.255 Mask:
> 255.255.255.0
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:547 errors:0 dropped:0 overruns:0 frame:0
> TX packets:408 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:0
> RX bytes:47709 (46.5 KiB) TX bytes:60077 (58.6 KiB)
>
> wds0.2 Link encap:Ethernet HWaddr 00:12:17:C7:95:E5
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:100
> RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
>
> -----Original Message-----
> From: wifidog-bounces at listes.ilesansfil.org
> [mailto:wifidog-bounces at listes.ilesansfil.org] On Behalf Of
> Philippe April
> Sent: Wednesday, June 15, 2005 5:25 PM
> To: WiFiDog Captive Portal
> Subject: Re: [isf-wifidog] mesh
>
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> If you just killed the bridge, the config for outgoing interface
> (wan_, telling it to use wds0.2) only works at bootup by the openwrt
> scripts. Therefore, the bridge has to be non-existent at bootup.
>
> Have you done the nvram changes I sent you? If so, what's happening
> now on neuronB? (ifconfig -a)
>
> On 15-Jun-05, at 9:49 AM, Dr. Marios Moutzouris wrote:
>
>
>> I've search high and low on the openwrt site. And have tried a few
>> things. I
>> killed the br0 interface somehow [how, is unknown], nevertheless. I
>> should
>> be able to ping from neuronB to neuronA?
>>
>> Also somewhere I saw that SSID needs to be the same ( for
>> neuronB[wan_hostname] I said ssid=neuronA], and so I did, and when
>> I put wl
>> status, I get the status of neuronA.
>>
>> Does some kind of routing need to be established so the one can
>> ping the
>> other?
>>
>> Marios
>>
>> -----Original Message-----
>> From: wifidog-bounces at listes.ilesansfil.org
>> [mailto:wifidog-bounces at listes.ilesansfil.org] On Behalf Of
>> Philippe April
>> Sent: Wednesday, June 15, 2005 4:13 PM
>> To: WiFiDog Captive Portal
>> Subject: Re: [isf-wifidog] mesh
>>
>> -----BEGIN PGP SIGNED MESSAGE-----
>> Hash: SHA1
>>
>> I don't understand why both routers don't go into AP mode even though
>> they seem to be set for infrastructure mode, but for neuronB, the
>> bridge is still up. Since the bridge exists, wds0.2 joins it.
>>
>> I don't know if there's a way to not make it join it, besides hacking
>> it with scripts after bootup OR removing the bridge.
>>
>> Let's remove the bridge. I thought I had tried that before but it
>> doesn't seem to have worked.
>>
>> On neuronB:
>>
>> nvram set lan_ifnames=vlan0
>> nvram set lan_proto=static
>> nvram set lan_ipaddr=192.168.3.1
>> nvram set lan_ifname=vlan0
>>
>> nvram set wifi_ifnames=eth1
>> nvram set wifi_ifname=eth1
>> nvram set wifi_proto=static
>> nvram set wifi_ipaddr=192.168.4.1
>> nvram set wifi_netmask=255.255.255.0
>>
>> nvram commit
>>
>> Then edit /etc/dnsmasq.conf and add another line for the new
>> 192.168.4.0 subnet.
>>
>> Now wds0.2 should not join.
>>
>> Only issue left that I can see is that they both don't go into AP
>> mode. Force them for now by doing:
>>
>> wl ap 1
>>
>> On 14-Jun-05, at 1:47 AM, Dr. Marios Moutzouris wrote:
>>
>>
>>
>>> Okay here goes;-)
>>>
>>> root at neuronA:~# nvram show | grep ^wl0_
>>> wl0_net_mode=mixed
>>> wl0_frameburst=off
>>> wl0_wep_buf=
>>> wl0_macmode1=disabled
>>> wl0_infra=1
>>> wl0_country_code=AU
>>> wl0_ap_ssid=
>>> wl0_ifname=eth1
>>> wl0_mrate=0
>>> wl0_mode=ap
>>> wl0_ap_isolate=0
>>> wl0_gmode=1
>>> wl0_wep_last=
>>> wl0_ssid=neuronA
>>> wl0_dtim=1
>>> wl0_key1=
>>> wl0_key2=
>>> wl0_key3=
>>> wl0_key4=
>>> wl0_closed=0
>>> wl0_rate=0
>>> wl0_plcphdr=long
>>> wl0_macmode=disabled
>>> wl0_radioids=BCM2050
>>> wl0_phytype=g
>>> wl0_lazywds=0
>>> wl0_afterburner=off
>>> wl0_antdiv=-1
>>> wl0_wpa_psk=
>>> wl0_mac_list=
>>> wl0_unit=0
>>> size: 8876 bytes (23892 left)
>>> wl0_wds=00:12:17:C7:95:E5
>>> wl0_auth=0
>>> wl0_radius_port=1812
>>> wl0_mac_deny=
>>> wl0_radius_ipaddr=
>>> wl0_phytypes=g
>>> wl0_wep=disabled
>>> wl0_frag=2346
>>> wl0_country=Worldwide
>>> wl0_rateset=default
>>> wl0_wep_bit=64
>>> wl0_passphrase=
>>> wl0_rts=2347
>>> wl0_wpa_gtk_rekey=3600
>>> wl0_key=1
>>> wl0_active_mac=
>>> wl0_radio=1
>>> wl0_bcn=100
>>> wl0_hwaddr=00:12:17:C7:93:A5
>>> wl0_wep_gen=
>>> wl0_gmode_protection=off
>>> wl0_maclist=
>>> wl0_radius_key=
>>> wl0_corerev=7
>>> wl0_channel=6
>>> wl0_auth_mode=open
>>> wl0_crypto=tkip
>>> wl0_ap_ip=
>>>
>>> root at neuronA:~# nvram show | grep ^wan_
>>> wan_unit=0
>>> wan_get_dns=192.168.0.2
>>> wan_run_mtu=1500
>>> wan_lease=43200
>>> wan_gateway=192.168.0.1
>>> wan_hwname=
>>> wan_domain=
>>> wan_netmask=255.255.255.0
>>> wan_dns=192.168.0.2
>>> wan_proto=dhcp
>>> size: 8876 bytes (23892 left)
>>> wan_hwaddr=00:12:17:C7:93:A4
>>> wan_ifnames=vlan1
>>> wan_primary=1
>>> wan_gateway_buf=0.0.0.0
>>> wan_iface=vlan1
>>> wan_ipaddr=10.0.0.1
>>> wan_ipaddr_buf=0.0.0.0
>>> wan_wins=0.0.0.0
>>> wan_mtu=1500
>>> wan_get_domain=
>>> wan_ifname=vlan1
>>> wan_hostname=neuronA
>>>
>>> root at neuronA:~# nvram show | grep ^wifi_
>>> size: 8876 bytes (23892 left)
>>> wifi_proto=dhcp
>>>
>>> root at neuronA:~# nvram show | grep ^lan_
>>> lan_domain=
>>> lan_netmask=255.255.255.0
>>> lan_lease=86400
>>> lan_stp=0
>>> lan_hwaddr=00:12:17:C7:93:A3
>>> size: 8876 bytes (23892 left)
>>> lan_ifnames=vlan0 eth1 eth2 eth3
>>> lan_ipaddr=192.168.2.1
>>> lan_proto=dhcp
>>> lan_ifname=br0
>>> lan_wins=
>>> lan_hwnames=
>>>
>>>
>>> root at neuronB:~# nvram show | grep ^wl0_
>>> wl0_net_mode=mixed
>>> wl0_frameburst=off
>>> wl0_wep_buf=
>>> wl0_macmode1=disabled
>>> wl0_infra=1
>>> wl0_country_code=AU
>>> wl0_ap_ssid=
>>> wl0_ifname=eth1
>>> wl0_mrate=0
>>> wl0_mode=sta
>>> wl0_ap_isolate=0
>>> wl0_gmode=1
>>> wl0_wep_last=
>>> wl0_dtim=1
>>> wl0_ssid=neuronB
>>> wl0_key1=
>>> wl0_key2=
>>> wl0_key3=
>>> wl0_key4=
>>> wl0_plcphdr=long
>>> wl0_rate=0
>>> wl0_closed=0
>>> wl0_macmode=disabled
>>> wl0_radioids=BCM2050
>>> wl0_phytype=g
>>> wl0_lazywds=0
>>> wl0_afterburner=off
>>> wl0_antdiv=-1
>>> wl0_wpa_psk=
>>> wl0_mac_list=
>>> wl0_unit=0
>>> size: 8871 bytes (23897 left)
>>> wl0_wds=00:12:17:C7:93:A5
>>> wl0_mac_deny=
>>> wl0_radius_port=1812
>>> wl0_auth=0
>>> wl0_radius_ipaddr=
>>> wl0_phytypes=g
>>> wl0_frag=2346
>>> wl0_wep=disabled
>>> wl0_country=Worldwide
>>> wl0_rateset=default
>>> wl0_wep_bit=64
>>> wl0_passphrase=
>>> wl0_rts=2347
>>> wl0_wpa_gtk_rekey=3600
>>> wl0_key=1
>>> wl0_active_mac=
>>> wl0_radio=1
>>> wl0_bcn=100
>>> wl0_hwaddr=00:12:17:C7:95:E5
>>> wl0_wep_gen=
>>> wl0_gmode_protection=off
>>> wl0_maclist=
>>> wl0_radius_key=
>>> wl0_corerev=7
>>> wl0_channel=6
>>> wl0_auth_mode=open
>>> wl0_crypto=tkip
>>> wl0_ap_ip=
>>>
>>> root at neuronB:~# nvram show | grep ^wan_
>>> wan_unit=0
>>> wan_get_dns=62.169.201.2
>>> wan_run_mtu=1500
>>> wan_lease=43200
>>> wan_gateway=192.168.2.1
>>> wan_domain=
>>> wan_hwname=
>>> wan_netmask=255.255.255.0
>>> wan_dns=192.168.0.2
>>> wan_proto=static
>>> size: 8871 bytes (23897 left)
>>> wan_hwaddr=00:12:17:C7:95:E4
>>> wan_ifnames=wds0.2
>>> wan_primary=1
>>> wan_gateway_buf=0.0.0.0
>>> wan_iface=vlan1
>>> wan_ipaddr=192.168.2.2
>>> wan_wins=0.0.0.0
>>> wan_mtu=1500
>>> wan_get_domain=
>>> wan_ifname=wds0.2
>>> wan_hostname=neuronB
>>>
>>> root at neuronB:~# nvram show | grep ^wifi_
>>> size: 8871 bytes (23897 left)
>>>
>>>
>>> root at neuronB:~# nvram show | grep ^lan_
>>> lan_domain=
>>> lan_netmask=255.255.255.0
>>> lan_lease=86400
>>> lan_stp=0
>>> lan_hwaddr=00:12:17:C7:95:E3
>>> size: 8871 bytes (23897 left)
>>> lan_ifnames=vlan0 eth1 eth2 eth3
>>> lan_proto=dhcp
>>> lan_ipaddr=192.168.3.1
>>> lan_ifname=br0
>>> lan_wins=
>>> lan_hwnames=
>>>
>>> -----Original Message-----
>>> From: wifidog-bounces at listes.ilesansfil.org
>>> [mailto:wifidog-bounces at listes.ilesansfil.org] On Behalf Of
>>> Philippe April
>>> Sent: Monday, June 13, 2005 6:41 PM
>>> To: WiFiDog Captive Portal
>>> Subject: Re: [isf-wifidog] mesh
>>>
>>> -----BEGIN PGP SIGNED MESSAGE-----
>>> Hash: SHA1
>>>
>>> Hi...
>>>
>>> Well it looks like both AP's are off, first of all. Not sure if that
>>> would work so check:
>>>
>>> nvram show | grep ^wl0_
>>>
>>> and send the results over.
>>>
>>> Also, it looks like the bridge on neuronB has NOT been disabled.
>>>
>>> Send me the results of
>>>
>>> nvram show | grep ^wan_
>>> nvram show | grep ^wifi_
>>> nvram show | grep ^lan_
>>>
>>> Basically, the goal now is to bring back AP = 1 on both routers, AND
>>> to break the bridge on neuronB so you'd have a separate eth1 (wifi),
>>> vlan1 (switch ports) and wds0.2.
>>>
>>> wds0.2 would become your new "wan" link (default gateway).
>>>
>>> So send me the nvram show's and I can tell you what I think you
>>> could
>>> change.
>>>
>>> On 13-Jun-05, at 10:41 AM, Dr. Marios Moutzouris wrote:
>>>
>>>
>>>
>>>
>>>> Thanks Philippe.
>>>>
>>>> True what you say. Don’t have internet access from neuronB at
>>>> all.neuronA
>>>> has 'net access.
>>>>
>>>> neuronA
>>>> ========
>>>> root at neuronA:~# brctl show
>>>> bridge name bridge id STP enabled interfaces
>>>> br0 8000.001217c793a3 no vlan0
>>>> eth1
>>>> wds0.2
>>>> root at neuronA:~# ifconfig -a
>>>> br0 Link encap:Ethernet HWaddr 00:12:17:C7:93:A3
>>>> inet addr:192.168.2.1 Bcast:192.168.2.255 Mask:
>>>> 255.255.255.0
>>>> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
>>>> RX packets:0 errors:0 dropped:0 overruns:0 frame:0
>>>> TX packets:9 errors:0 dropped:0 overruns:0 carrier:0
>>>> collisions:0 txqueuelen:0
>>>> RX bytes:0 (0.0 B) TX bytes:378 (378.0 B)
>>>>
>>>> eth0 Link encap:Ethernet HWaddr 00:12:17:C7:93:A3
>>>> UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500
>>>> Metric:1
>>>> RX packets:4409 errors:0 dropped:0 overruns:0 frame:0
>>>> TX packets:1473 errors:0 dropped:0 overruns:0 carrier:0
>>>> collisions:0 txqueuelen:100
>>>> RX bytes:395866 (386.5 KiB) TX bytes:131316 (128.2 KiB)
>>>> Interrupt:5 Base address:0x2000
>>>>
>>>> eth1 Link encap:Ethernet HWaddr 00:12:17:C7:93:A5
>>>> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
>>>> RX packets:0 errors:0 dropped:0 overruns:0 frame:1518
>>>> TX packets:18 errors:0 dropped:0 overruns:0 carrier:0
>>>> collisions:0 txqueuelen:100
>>>> RX bytes:0 (0.0 B) TX bytes:900 (900.0 B)
>>>> Interrupt:4 Base address:0x1000
>>>>
>>>> lo Link encap:Local Loopback
>>>> inet addr:127.0.0.1 Mask:255.0.0.0
>>>> UP LOOPBACK RUNNING MTU:16436 Metric:1
>>>> RX packets:13 errors:0 dropped:0 overruns:0 frame:0
>>>> TX packets:13 errors:0 dropped:0 overruns:0 carrier:0
>>>> collisions:0 txqueuelen:0
>>>> RX bytes:1344 (1.3 KiB) TX bytes:1344 (1.3 KiB)
>>>>
>>>> vlan0 Link encap:Ethernet HWaddr 00:12:17:C7:93:A3
>>>> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
>>>> RX packets:0 errors:0 dropped:0 overruns:0 frame:0
>>>> TX packets:9 errors:0 dropped:0 overruns:0 carrier:0
>>>> collisions:0 txqueuelen:0
>>>> RX bytes:0 (0.0 B) TX bytes:414 (414.0 B)
>>>>
>>>> vlan1 Link encap:Ethernet HWaddr 00:12:17:C7:93:A4
>>>> inet addr:192.168.0.220 Bcast:192.168.0.255 Mask:
>>>> 255.255.255.0
>>>> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
>>>> RX packets:2719 errors:0 dropped:0 overruns:0 frame:0
>>>> TX packets:1464 errors:0 dropped:0 overruns:0 carrier:0
>>>> collisions:0 txqueuelen:0
>>>> RX bytes:238758 (233.1 KiB) TX bytes:130902 (127.8 KiB)
>>>>
>>>> wds0.2 Link encap:Ethernet HWaddr 00:12:17:C7:93:A5
>>>> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
>>>> RX packets:0 errors:0 dropped:0 overruns:0 frame:0
>>>> TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
>>>> collisions:0 txqueuelen:100
>>>> RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
>>>> root at neuronA:~# netstat -rn
>>>> Kernel IP routing table
>>>> Destination Gateway Genmask Flags MSS Window
>>>> irtt
>>>> Iface
>>>> 192.168.2.0 0.0.0.0 255.255.255.0 U 40
>>>> 0 0 br0
>>>> 192.168.0.0 0.0.0.0 255.255.255.0 U 40
>>>> 0 0
>>>> vlan1
>>>> 0.0.0.0 192.168.0.1 0.0.0.0 UG 40
>>>> 0 0
>>>> vlan1
>>>> root at neuronA:~# wl ap
>>>> ap is 0 (off)
>>>> root at neuronA:~# wl channel
>>>> No scan in progress.
>>>> current mac channel 6
>>>> target channel 6
>>>> root at neuronA:~# wl ssid
>>>> Current SSID: "neuronA"
>>>> neuronB
>>>> ========
>>>> root at neuronB:~# brctl show
>>>> bridge name bridge id STP enabled interfaces
>>>> br0 8000.001217c795e3 no vlan0
>>>> eth1
>>>> wds0.2
>>>> root at neuronB:~# ifconfig -a
>>>> br0 Link encap:Ethernet HWaddr 00:12:17:C7:95:E3
>>>> inet addr:192.168.3.1 Bcast:192.168.3.255 Mask:
>>>> 255.255.255.0
>>>> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
>>>> RX packets:174 errors:0 dropped:0 overruns:0 frame:0
>>>> TX packets:154 errors:0 dropped:0 overruns:0 carrier:0
>>>> collisions:0 txqueuelen:0
>>>> RX bytes:13974 (13.6 KiB) TX bytes:17217 (16.8 KiB)
>>>>
>>>> eth0 Link encap:Ethernet HWaddr 00:12:17:C7:95:E3
>>>> UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500
>>>> Metric:1
>>>> RX packets:174 errors:0 dropped:0 overruns:0 frame:0
>>>> TX packets:154 errors:0 dropped:0 overruns:0 carrier:0
>>>> collisions:0 txqueuelen:100
>>>> RX bytes:18102 (17.6 KiB) TX bytes:17833 (17.4 KiB)
>>>> Interrupt:5 Base address:0x2000
>>>>
>>>> eth1 Link encap:Ethernet HWaddr 00:12:17:C7:95:E5
>>>> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
>>>> RX packets:0 errors:0 dropped:0 overruns:0 frame:93
>>>> TX packets:27 errors:31 dropped:0 overruns:0 carrier:0
>>>> collisions:0 txqueuelen:100
>>>> RX bytes:0 (0.0 B) TX bytes:3727 (3.6 KiB)
>>>> Interrupt:4 Base address:0x1000
>>>>
>>>> lo Link encap:Local Loopback
>>>> inet addr:127.0.0.1 Mask:255.0.0.0
>>>> UP LOOPBACK RUNNING MTU:16436 Metric:1
>>>> RX packets:2 errors:0 dropped:0 overruns:0 frame:0
>>>> TX packets:2 errors:0 dropped:0 overruns:0 carrier:0
>>>> collisions:0 txqueuelen:0
>>>> RX bytes:168 (168.0 B) TX bytes:168 (168.0 B)
>>>>
>>>> vlan0 Link encap:Ethernet HWaddr 00:12:17:C7:95:E3
>>>> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
>>>> RX packets:174 errors:0 dropped:0 overruns:0 frame:0
>>>> TX packets:154 errors:0 dropped:0 overruns:0 carrier:0
>>>> collisions:0 txqueuelen:0
>>>> RX bytes:14970 (14.6 KiB) TX bytes:17833 (17.4 KiB)
>>>>
>>>> wds0.2 Link encap:Ethernet HWaddr 00:12:17:C7:95:E5
>>>> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
>>>> RX packets:0 errors:0 dropped:0 overruns:0 frame:0
>>>> TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
>>>> collisions:0 txqueuelen:100
>>>> RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) root at neuronB:~#
>>>> netstat -rn
>>>> Kernel IP routing table
>>>> Destination Gateway Genmask Flags MSS Window
>>>> irtt
>>>> Iface
>>>> 192.168.3.0 0.0.0.0 255.255.255.0 U 40
>>>> 0 0 br0
>>>> root at neuronB:~# wl ap
>>>> ap is 0 (off)
>>>> root at neuronB:~# wl channel
>>>> No scan in progress.
>>>> current mac channel 6
>>>> target channel 6
>>>> root at neuronB:~# wl ssid
>>>> Current SSID: ""
>>>> -----Original Message-----
>>>> From: wifidog-bounces at listes.ilesansfil.org
>>>> [mailto:wifidog-bounces at listes.ilesansfil.org] On Behalf Of
>>>> Philippe April
>>>> Sent: Monday, June 13, 2005 5:16 PM
>>>> To: WiFiDog Captive Portal
>>>> Subject: Re: [isf-wifidog] mesh
>>>>
>>>> -----BEGIN PGP SIGNED MESSAGE-----
>>>> Hash: SHA1
>>>>
>>>> When you're not in AP mode (to scan like you're doing, wl ap 0 must
>>>> have been done earlier), you obviously stop broadcasting ssid.
>>>>
>>>> Perhaps neuronA was not in AP mode when you scanned with neuronB.
>>>>
>>>> From neuronB, can you ping its default gateway (which should be
>>>> neuronA)?
>>>>
>>>> From neuronB, you should be able to connect to the internet
>>>> (pings,
>>>> etc.) and it should go through neuronA.
>>>>
>>>> If not, show me the config:
>>>>
>>>> brctl show
>>>> ifconfig -a
>>>> netstat -rn
>>>> wl ap
>>>> wl channel
>>>> wl ssid
>>>>
>>>> That should be enough :)
>>>>
>>>> On 13-Jun-05, at 9:52 AM, Dr. Marios Moutzouris wrote:
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>> Okay I have now neuronA and neuronB, where neuronA has net access
>>>>> and has
>>>>> dhcp to its clients in 192.168.2.x range
>>>>> While neuronB has no internet connection. Funny thing is from
>>>>> neuronB if I
>>>>> do a wl scan ; sleep 1 ; wl scanresults it DOES not see neuronA.
>>>>> But neuronA
>>>>> with the same command sees neuronB. neuronB also sees other
>>>>> wireless
>>>>> networks but not the one in particular. Both are on the 11
>>>>> channel.
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>> From below I gather that wifidog will not be monitoring the LAN
>>>>>> ports? Since
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>> I don’t have wireless devices at the moment, its kinda
>>>>> imperative I
>>>>> test
>>>>> with PCs. I tried the below recipe but to no avail. Should I
>>>>> change
>>>>> the mode
>>>>> the neuronB linksys is running...example station/client mode?
>>>>>
>>>>> Marios
>>>>>
>>>>> -----Original Message-----
>>>>> From: wifidog-bounces at listes.ilesansfil.org
>>>>> [mailto:wifidog-bounces at listes.ilesansfil.org] On Behalf Of
>>>>> Philippe April
>>>>> Sent: Wednesday, June 08, 2005 5:42 PM
>>>>> To: WiFiDog Captive Portal
>>>>> Subject: Re: [isf-wifidog] mesh
>>>>>
>>>>> -----BEGIN PGP SIGNED MESSAGE-----
>>>>> Hash: SHA1
>>>>>
>>>>> There's one thing that hasn't worked:
>>>>>
>>>>> on 'default', wds0.2 joined the bridge, it shouldn't have.
>>>>>
>>>>> So perhaps this part:
>>>>> nvram set wan_ifnames=wds0.2
>>>>> nvram set wan_ifname=wds0.2
>>>>> nvram set wan_ipaddr=192.168.1.2
>>>>> nvram set wan_netmask=255.255.255.0
>>>>> nvram set wan_gateway=192.168.1.1
>>>>> nvram set wan_proto=static
>>>>>
>>>>> Isn't doing the job, the wds link seems to STILL join br0.
>>>>>
>>>>> Can you send me (before you act on the changes below) the output
>>>>> of:
>>>>> nvram show | grep ^wan_
>>>>>
>>>>> Just to confirm the changes were committed alright.
>>>>>
>>>>> Now, what we could do is to break br0, it should work after that
>>>>> (on
>>>>> default).
>>>>>
>>>>> nvram set lan_ifnames=vlan0
>>>>> nvram set lan_ifname=vlan0
>>>>>
>>>>> nvram set wifi_ifnames=eth1
>>>>> nvram set wifi_ifname=eth1
>>>>> nvram set wifi_ipaddr=192.168.20.1
>>>>> nvram set wifi_netmask=255.255.255.0
>>>>> nvram set wifi_proto=static
>>>>>
>>>>> And edit /etc/dnsmasq.conf to add another line:
>>>>> dhcp-range=192.168.20.100,192.168.20.250,255.255.255.0,12h
>>>>>
>>>>> To have DHCP enabled also on the "new" wireless link (eth1 now
>>>>> that
>>>>> it's separated).
>>>>>
>>>>> Now, wds0.2 should NOT join br0 anymore (doesn't exist).
>>>>>
>>>>> And you should have vlan0 = your lan ports and eth1 = your
>>>>> wireless.
>>>>>
>>>>> So you could now change wifidog's config to use eth1 instead of
>>>>> br0.
>>>>>
>>>>> Let me know if we're heading somewhere with this.
>>>>>
>>>>> On 8-Jun-05, at 5:54 AM, Dr. Marios Moutzouris wrote:
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>> Okay here is the spew
>>>>>> neuronA(router 1) - is the main linksys that has an internet
>>>>>> connection
>>>>>> default(router 2) - the other linksys that has to get an internet
>>>>>> connection
>>>>>> from neuronA
>>>>>> + root at neuronA:~# ifconfig -a
>>>>>> br0 Link encap:Ethernet HWaddr 00:12:17:C7:93:A3
>>>>>> inet addr:192.168.2.1 Bcast:192.168.2.255 Mask:
>>>>>> 255.255.255.0
>>>>>> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
>>>>>> RX packets:247 errors:0 dropped:0 overruns:0 frame:0
>>>>>> TX packets:174 errors:0 dropped:0 overruns:0 carrier:0
>>>>>> collisions:0 txqueuelen:0
>>>>>> RX bytes:22721 (22.1 KiB) TX bytes:25088 (24.5 KiB)
>>>>>> eth0 Link encap:Ethernet HWaddr 00:12:17:C7:93:A3
>>>>>> UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500
>>>>>> Metric:1
>>>>>> RX packets:1116 errors:0 dropped:0 overruns:0 frame:0
>>>>>> TX packets:300 errors:0 dropped:0 overruns:0 carrier:0
>>>>>> collisions:0 txqueuelen:100
>>>>>> RX bytes:103076 (100.6 KiB) TX bytes:38657 (37.7 KiB)
>>>>>> Interrupt:5 Base address:0x2000
>>>>>> eth1 Link encap:Ethernet HWaddr 00:12:17:C7:93:A5
>>>>>> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
>>>>>> RX packets:0 errors:0 dropped:0 overruns:0 frame:213
>>>>>> TX packets:23 errors:6 dropped:0 overruns:0 carrier:0
>>>>>> collisions:0 txqueuelen:100
>>>>>> RX bytes:0 (0.0 B) TX bytes:2779 (2.7 KiB)
>>>>>> Interrupt:4 Base address:0x1000
>>>>>> lo Link encap:Local Loopback
>>>>>> inet addr:127.0.0.1 Mask:255.0.0.0
>>>>>> UP LOOPBACK RUNNING MTU:16436 Metric:1
>>>>>> RX packets:0 errors:0 dropped:0 overruns:0 frame:0
>>>>>> TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
>>>>>> collisions:0 txqueuelen:0
>>>>>> RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
>>>>>> vlan0 Link encap:Ethernet HWaddr 00:12:17:C7:93:A3
>>>>>> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
>>>>>> RX packets:247 errors:0 dropped:0 overruns:0 frame:0
>>>>>> TX packets:174 errors:0 dropped:0 overruns:0 carrier:0
>>>>>> collisions:0 txqueuelen:0
>>>>>> RX bytes:23917 (23.3 KiB) TX bytes:25784 (25.1 KiB)
>>>>>> vlan1 Link encap:Ethernet HWaddr 00:12:17:C7:93:A4
>>>>>> inet addr:192.168.0.220 Bcast:192.168.0.255 Mask:
>>>>>> 255.255.255.0
>>>>>> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
>>>>>> RX packets:515 errors:0 dropped:0 overruns:0 frame:0
>>>>>> TX packets:126 errors:0 dropped:0 overruns:0 carrier:0
>>>>>> collisions:0 txqueuelen:0
>>>>>> RX bytes:42441 (41.4 KiB) TX bytes:12873 (12.5 KiB)
>>>>>> wds0.2 Link encap:Ethernet HWaddr 00:12:17:C7:93:A5
>>>>>> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
>>>>>> RX packets:0 errors:0 dropped:0 overruns:0 frame:0
>>>>>> TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
>>>>>> collisions:0 txqueuelen:100
>>>>>> RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
>>>>>> + root at neuronA:~# netstat -rn
>>>>>> Kernel IP routing table
>>>>>> Destination Gateway Genmask Flags MSS
>>>>>> Window
>>>>>> irtt
>>>>>> Iface
>>>>>> 192.168.2.0 0.0.0.0 255.255.255.0 U 40
>>>>>> 0 0 br0
>>>>>> 192.168.0.0 0.0.0.0 255.255.255.0 U 40
>>>>>> 0 0
>>>>>> vlan1
>>>>>> 0.0.0.0 192.168.0.1 0.0.0.0 UG 40
>>>>>> 0 0
>>>>>> vlan1
>>>>>> + root at default:~# ifconfig -a
>>>>>> br0 Link encap:Ethernet HWaddr 00:0F:66:C8:78:43
>>>>>> inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:
>>>>>> 255.255.255.0
>>>>>> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
>>>>>> RX packets:823 errors:0 dropped:0 overruns:0 frame:0
>>>>>> TX packets:535 errors:0 dropped:0 overruns:0 carrier:0
>>>>>> collisions:0 txqueuelen:0
>>>>>> RX bytes:104554 (102.1 KiB) TX bytes:65823 (64.2 KiB)
>>>>>>
>>>>>> eth0 Link encap:Ethernet HWaddr 00:0F:66:C8:78:43
>>>>>> UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500
>>>>>> Metric:1
>>>>>> RX packets:824 errors:0 dropped:0 overruns:0 frame:0
>>>>>> TX packets:535 errors:0 dropped:0 overruns:0 carrier:0
>>>>>> collisions:0 txqueuelen:100
>>>>>> RX bytes:122801 (119.9 KiB) TX bytes:67963 (66.3 KiB)
>>>>>> Interrupt:5 Base address:0x2000
>>>>>>
>>>>>> eth1 Link encap:Ethernet HWaddr 00:0F:66:C8:78:45
>>>>>> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
>>>>>> RX packets:0 errors:0 dropped:0 overruns:0 frame:72
>>>>>> TX packets:35 errors:27 dropped:0 overruns:0 carrier:0
>>>>>> collisions:0 txqueuelen:100
>>>>>> RX bytes:0 (0.0 B) TX bytes:8214 (8.0 KiB)
>>>>>> Interrupt:4 Base address:0x1000
>>>>>>
>>>>>> lo Link encap:Local Loopback
>>>>>> inet addr:127.0.0.1 Mask:255.0.0.0
>>>>>> UP LOOPBACK RUNNING MTU:16436 Metric:1
>>>>>> RX packets:0 errors:0 dropped:0 overruns:0 frame:0
>>>>>> TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
>>>>>> collisions:0 txqueuelen:0
>>>>>> RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
>>>>>>
>>>>>> vlan0 Link encap:Ethernet HWaddr 00:0F:66:C8:78:43
>>>>>> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
>>>>>> RX packets:824 errors:0 dropped:0 overruns:0 frame:0
>>>>>> TX packets:535 errors:0 dropped:0 overruns:0 carrier:0
>>>>>> collisions:0 txqueuelen:0
>>>>>> RX bytes:107969 (105.4 KiB) TX bytes:67963 (66.3 KiB)
>>>>>>
>>>>>> wds0.2 Link encap:Ethernet HWaddr 00:0F:66:C8:78:45
>>>>>> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
>>>>>> RX packets:0 errors:0 dropped:0 overruns:0 frame:0
>>>>>> TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
>>>>>> collisions:0 txqueuelen:100
>>>>>> RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
>>>>>>
>>>>>> root at default:~# netstat -rn
>>>>>> Kernel IP routing table
>>>>>> Destination Gateway Genmask Flags MSS
>>>>>> Window
>>>>>> irtt
>>>>>> Iface
>>>>>> 192.168.1.0 0.0.0.0 255.255.255.0 U 40
>>>>>> 0 0 br0
>>>>>>
>>>>>> root at default:~# brctl show
>>>>>> bridge name bridge id STP enabled
>>>>>> interfaces
>>>>>> br0 8000.000f66c87843 no vlan0
>>>>>> eth1
>>>>>> wds0.2
>>>>>>
>>>>>> root at default:~# wl channel
>>>>>> No scan in progress.
>>>>>> current mac channel 6
>>>>>> target channel 6
>>>>>>
>>>>>> root at neuronA:~# brctl show
>>>>>> bridge name bridge id STP enabled
>>>>>> interfaces
>>>>>> br0 8000.001217c793a3 no vlan0
>>>>>> eth1
>>>>>> wds0.2
>>>>>>
>>>>>>
>>>>>>
>>>>>> root at neuronA:~# wl channel
>>>>>> No scan in progress.
>>>>>> current mac channel 6
>>>>>> target channel 6
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> -----Original Message-----
>>>>>> From: wifidog-bounces at listes.ilesansfil.org
>>>>>> [mailto:wifidog-bounces at listes.ilesansfil.org] On Behalf Of
>>>>>> Philippe April
>>>>>> Sent: Tuesday, June 07, 2005 4:34 PM
>>>>>> To: WiFiDog Captive Portal
>>>>>> Subject: Re: [isf-wifidog] mesh
>>>>>>
>>>>>> -----BEGIN PGP SIGNED MESSAGE-----
>>>>>> Hash: SHA1
>>>>>>
>>>>>> Can you give more détails on why and what didn't work exactly?
>>>>>>
>>>>>> If the setup is still in place, send me the output of:
>>>>>>
>>>>>> ifconfig -a
>>>>>> netstat -rn
>>>>>> brctl show
>>>>>> wl channel
>>>>>>
>>>>>> for both routers.
>>>>>>
>>>>>> Oh, I forgot to mention, you need to install the 'wl' package I
>>>>>> think
>>>>>> in order for WDS to work.
>>>>>>
>>>>>> On 7-Jun-05, at 8:38 AM, Dr. Marios Moutzouris wrote:
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>> I tried, but no luck:(
>>>>>>>
>>>>>>> Any other ideas?
>>>>>>>
>>>>>>> Marios
>>>>>>>
>>>>>>> -----Original Message-----
>>>>>>> From: wifidog-bounces at listes.ilesansfil.org
>>>>>>> [mailto:wifidog-bounces at listes.ilesansfil.org] On Behalf Of
>>>>>>> Philippe April
>>>>>>> Sent: Monday, June 06, 2005 3:34 PM
>>>>>>> To: WiFiDog Captive Portal
>>>>>>> Subject: Re: [isf-wifidog] mesh
>>>>>>>
>>>>>>> -----BEGIN PGP SIGNED MESSAGE-----
>>>>>>> Hash: SHA1
>>>>>>>
>>>>>>> Here's what I would do:
>>>>>>>
>>>>>>> Put them both on the same channel (no need to be same ssid)
>>>>>>>
>>>>>>> router 1:
>>>>>>> nvram set wl0_wds=mac_of_router_2's_wifi_interface
>>>>>>>
>>>>>>> router 2:
>>>>>>> nvram set wl0_wds=mac_of_router_1's_wifi_interface
>>>>>>>
>>>>>>> Also set the wl_wds variables to the same thing, it's said that
>>>>>>> it's
>>>>>>> required to have both (did anybody research this and can answer
>>>>>>> why?)
>>>>>>>
>>>>>>> Turn off lazy_wds. Basically with that, anybody can make you a
>>>>>>> WDS
>>>>>>> peer and you'll accept. No need.
>>>>>>>
>>>>>>> nvram set wl0_lazywds=0
>>>>>>>
>>>>>>> WDS links will join the bridge br0 by default. What we can
>>>>>>> try, is
>>>>>>> basically try to make the "client" (one that'll take the
>>>>>>> internet
>>>>>>> from the other)'s WAN config, the new wds link.
>>>>>>>
>>>>>>> #router2 (client)
>>>>>>> nvram set wan_ifnames=wds0.2
>>>>>>> nvram set wan_ifname=wds0.2
>>>>>>> nvram set wan_ipaddr=192.168.1.2
>>>>>>> nvram set wan_netmask=255.255.255.0
>>>>>>> nvram set wan_gateway=192.168.1.1
>>>>>>> nvram set wan_proto=static
>>>>>>>
>>>>>>> #change the IP address of the bridge, since it'll overlap with
>>>>>>> WAN
>>>>>>> otherwise
>>>>>>> nvram set lan_ipaddr=192.168.2.1
>>>>>>>
>>>>>>> #commit
>>>>>>> nvram commit
>>>>>>>
>>>>>>> Edit /etc/dnsmasq.conf to make it give IPs on 192.168.2.x
>>>>>>> instead of
>>>>>>> 192.168.1.x.
>>>>>>>
>>>>>>> So basically what I'm trying to do:
>>>>>>>
>>>>>>> #router1 - gateway
>>>>>>> LAN - br0: LAN ports + WIFI + WDS link (192.168.1.x)
>>>>>>> WAN - vlan1: Internet, you know how to configure this
>>>>>>>
>>>>>>> (basically, the usual config)
>>>>>>>
>>>>>>> #router2 - client
>>>>>>> LAN - br0: LAN ports + WIFI
>>>>>>> WAN - wds0.2: WDS link (192.168.1.2)
>>>>>>>
>>>>>>> (we're replacing the WAN link to the WDS link, so the scripts
>>>>>>> should
>>>>>>> do NATting to that now instead of vlan1 + default route).
>>>>>>>
>>>>>>> Make wifidog listen on br0 on both.
>>>>>>>
>>>>>>> Okay I'm totally doing this _untested_, but it should work. Feel
>>>>>>> free
>>>>>>> to ask questions, it's tricky ;)
>>>>>>>
>>>>>>> I'd love to see if Freifunk is doing something similar. They
>>>>>>> might
>>>>>>> have added custom scripts to deal with... custom setups like
>>>>>>> this
>>>>>>> one :)
>>>>>>>
>>>>>>> On 6-Jun-05, at 6:33 AM, Dr. Marios Moutzouris wrote:
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>> I was hoping that it would be simply tweaking some of the nvram
>>>>>>>> variables on
>>>>>>>> a standard openwrt installation. Can it not be done so?
>>>>>>>>
>>>>>>>> Thanks
>>>>>>>> Marios
>>>>>>>>
>>>>>>>> -----Original Message-----
>>>>>>>> From: wifidog-bounces at listes.ilesansfil.org
>>>>>>>> [mailto:wifidog-bounces at listes.ilesansfil.org] On Behalf Of Jo
>>>>>>>> Walsh
>>>>>>>> Sent: Monday, June 06, 2005 1:29 PM
>>>>>>>> To: WiFiDog Captive Portal
>>>>>>>> Subject: Re: [isf-wifidog] mesh
>>>>>>>>
>>>>>>>> On Mon, Jun 06, 2005 at 01:09:39PM +0300, Dr. Marios Moutzouris
>>>>>>>> wrote:
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>> I don?t know whether it belongs here, but.....how do I setup
>>>>>>>>> two
>>>>>>>>> or more
>>>>>>>>> linksys's in a form of mesh where only one receives an
>>>>>>>>> internet
>>>>>>>>> connection
>>>>>>>>> and is "shared" amongst the others. Obviously wifidog will
>>>>>>>>> need to
>>>>>>>>> be run
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>> on
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>> each of them.
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>> we've had very good experiences with the Freifunk Firmware, a
>>>>>>>> mesh
>>>>>>>> routing openWRT distribution. It has a friendly web admin
>>>>>>>> GUI if
>>>>>>>> you
>>>>>>>> visit its port 80. the ISF Wifidog ipkg runs on it just fine.
>>>>>>>> http://www.freifunk.net/wiki/FreifunkFirmwareEnglish
>>>>>>>>
>>>>>>>>
>>>>>>>> -jo
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> --
>>>>>>>> No virus found in this incoming message.
>>>>>>>> Checked by AVG Anti-Virus.
>>>>>>>> Version: 7.0.323 / Virus Database: 267.6.2 - Release Date:
>>>>>>>> 4/6/2005
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> --
>>>>>>>> No virus found in this outgoing message.
>>>>>>>> Checked by AVG Anti-Virus.
>>>>>>>> Version: 7.0.323 / Virus Database: 267.6.2 - Release Date:
>>>>>>>> 4/6/2005
>>>>>>>>
>>>>>>>>
>>>>>>>> _______________________________________________
>>>>>>>> WiFiDog mailing list
>>>>>>>> WiFiDog at listes.ilesansfil.org
>>>>>>>> http://listes.ilesansfil.org/cgi-bin/mailman/listinfo/wifidog
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>> Philippe April
>>>>>>> GnuPG http://key.philippeapril.com
>>>>>>>
>>>>>>> -----BEGIN PGP SIGNATURE-----
>>>>>>> Version: GnuPG v1.2.4 (Darwin)
>>>>>>>
>>>>>>> iD8DBQFCpEKqOq+Ep5Xn/aARAhjXAKCq7ifma7DyM+5ObQedFclhUtVQawCdFXWH
>>>>>>> K7sKPOv4UnBZ5XpBp80DuXc=
>>>>>>> =gyz2
>>>>>>> -----END PGP SIGNATURE-----
>>>>>>>
>>>>>>> --
>>>>>>> No virus found in this incoming message.
>>>>>>> Checked by AVG Anti-Virus.
>>>>>>> Version: 7.0.323 / Virus Database: 267.6.2 - Release Date:
>>>>>>> 4/6/2005
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> --
>>>>>>> No virus found in this outgoing message.
>>>>>>> Checked by AVG Anti-Virus.
>>>>>>> Version: 7.0.323 / Virus Database: 267.6.4 - Release Date:
>>>>>>> 6/6/2005
>>>>>>>
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> WiFiDog mailing list
>>>>>>> WiFiDog at listes.ilesansfil.org
>>>>>>> http://listes.ilesansfil.org/cgi-bin/mailman/listinfo/wifidog
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>
>>>>>> Philippe April
>>>>>> GnuPG http://key.philippeapril.com
>>>>>>
>>>>>> -----BEGIN PGP SIGNATURE-----
>>>>>> Version: GnuPG v1.2.4 (Darwin)
>>>>>>
>>>>>> iD8DBQFCpaI7Oq+Ep5Xn/aARAir4AJ0TAgltP/D1zFTzh2v92SCzYWILqwCeJPGN
>>>>>> eRaxkVcPlJ86ZB7uYwuS+lg=
>>>>>> =oYVz
>>>>>> -----END PGP SIGNATURE-----
>>>>>> _______________________________________________
>>>>>> WiFiDog mailing list
>>>>>> WiFiDog at listes.ilesansfil.org
>>>>>> http://listes.ilesansfil.org/cgi-bin/mailman/listinfo/wifidog
>>>>>>
>>>>>> --
>>>>>> No virus found in this incoming message.
>>>>>> Checked by AVG Anti-Virus.
>>>>>> Version: 7.0.323 / Virus Database: 267.6.4 - Release Date:
>>>>>> 6/6/2005
>>>>>>
>>>>>>
>>>>>> --
>>>>>> No virus found in this outgoing message.
>>>>>> Checked by AVG Anti-Virus.
>>>>>> Version: 7.0.323 / Virus Database: 267.6.5 - Release Date:
>>>>>> 7/6/2005
>>>>>>
>>>>>>
>>>>>> _______________________________________________
>>>>>> WiFiDog mailing list
>>>>>> WiFiDog at listes.ilesansfil.org
>>>>>> http://listes.ilesansfil.org/cgi-bin/mailman/listinfo/wifidog
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>> Philippe April
>>>>> GnuPG http://key.philippeapril.com
>>>>>
>>>>> -----BEGIN PGP SIGNATURE-----
>>>>> Version: GnuPG v1.2.4 (Darwin)
>>>>>
>>>>> iD8DBQFCpwO5Oq+Ep5Xn/aARAh2FAJ0WBjaCb50fo3tluwq6sFmBxtsBKQCZATYp
>>>>> +dJEWLzKgyPevQK9OMvj0Ak=
>>>>> =xx8r
>>>>> -----END PGP SIGNATURE-----
>>>>> _______________________________________________
>>>>> WiFiDog mailing list
>>>>> WiFiDog at listes.ilesansfil.org
>>>>> http://listes.ilesansfil.org/cgi-bin/mailman/listinfo/wifidog
>>>>>
>>>>> --
>>>>> No virus found in this incoming message.
>>>>> Checked by AVG Anti-Virus.
>>>>> Version: 7.0.323 / Virus Database: 267.6.5 - Release Date:
>>>>> 7/6/2005
>>>>>
>>>>>
>>>>> --
>>>>> No virus found in this outgoing message.
>>>>> Checked by AVG Anti-Virus.
>>>>> Version: 7.0.323 / Virus Database: 267.6.9 - Release Date:
>>>>> 11/6/2005
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> WiFiDog mailing list
>>>>> WiFiDog at listes.ilesansfil.org
>>>>> http://listes.ilesansfil.org/cgi-bin/mailman/listinfo/wifidog
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>> Philippe April
>>>> GnuPG http://key.philippeapril.com
>>>>
>>>> -----BEGIN PGP SIGNATURE-----
>>>> Version: GnuPG v1.2.4 (Darwin)
>>>>
>>>> iD8DBQFCrZUsOq+Ep5Xn/aARAo9kAJ9mGpTeizDt9VuTQlNLvPjxF6klzgCeKgCd
>>>> MtpVNaV8pBzA/oSEiDiPzCA=
>>>> =QTOC
>>>> -----END PGP SIGNATURE-----
>>>>
>>>> --
>>>> No virus found in this incoming message.
>>>> Checked by AVG Anti-Virus.
>>>> Version: 7.0.323 / Virus Database: 267.6.9 - Release Date:
>>>> 11/6/2005
>>>>
>>>>
>>>>
>>>> --
>>>> No virus found in this outgoing message.
>>>> Checked by AVG Anti-Virus.
>>>> Version: 7.0.323 / Virus Database: 267.6.9 - Release Date:
>>>> 11/6/2005
>>>>
>>>>
>>>> _______________________________________________
>>>> WiFiDog mailing list
>>>> WiFiDog at listes.ilesansfil.org
>>>> http://listes.ilesansfil.org/cgi-bin/mailman/listinfo/wifidog
>>>>
>>>>
>>>>
>>>>
>>>>
>>>
>>> Philippe April
>>> GnuPG http://key.philippeapril.com
>>>
>>> -----BEGIN PGP SIGNATURE-----
>>> Version: GnuPG v1.2.4 (Darwin)
>>>
>>> iD8DBQFCraklOq+Ep5Xn/aARAqdvAJ4/DnuleytcXFyxEg6ToZ7s8elhNACgp3vU
>>> DgDNyvTJvz9XkYZSpmqthww=
>>> =uDVr
>>> -----END PGP SIGNATURE-----
>>>
>>> --
>>> No virus found in this incoming message.
>>> Checked by AVG Anti-Virus.
>>> Version: 7.0.323 / Virus Database: 267.6.9 - Release Date: 11/6/2005
>>>
>>>
>>>
>>> --
>>> No virus found in this outgoing message.
>>> Checked by AVG Anti-Virus.
>>> Version: 7.0.323 / Virus Database: 267.6.9 - Release Date: 11/6/2005
>>>
>>>
>>> _______________________________________________
>>> WiFiDog mailing list
>>> WiFiDog at listes.ilesansfil.org
>>> http://listes.ilesansfil.org/cgi-bin/mailman/listinfo/wifidog
>>>
>>>
>>>
>>>
>>
>> Philippe April
>> GnuPG http://key.philippeapril.com
>>
>> -----BEGIN PGP SIGNATURE-----
>> Version: GnuPG v1.2.4 (Darwin)
>>
>> iD8DBQFCsClnOq+Ep5Xn/aARAoulAJ9RPn7tGja2JMuAF5pfVGUeqB01PgCeLTSQ
>> R9wtvfeBq1A5lEXCFM34jfI=
>> =/OMG
>> -----END PGP SIGNATURE-----
>>
>> --
>> No virus found in this incoming message.
>> Checked by AVG Anti-Virus.
>> Version: 7.0.323 / Virus Database: 267.7.3/15 - Release Date:
>> 14/6/2005
>>
>>
>>
>> --
>> No virus found in this outgoing message.
>> Checked by AVG Anti-Virus.
>> Version: 7.0.323 / Virus Database: 267.7.3/15 - Release Date:
>> 14/6/2005
>>
>>
>> _______________________________________________
>> WiFiDog mailing list
>> WiFiDog at listes.ilesansfil.org
>> http://listes.ilesansfil.org/cgi-bin/mailman/listinfo/wifidog
>>
>>
>>
>
> Philippe April
> GnuPG http://key.philippeapril.com
>
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v1.2.4 (Darwin)
>
> iD8DBQFCsDpJOq+Ep5Xn/aARAhORAKCo5BAJtjzuQSiKj9YQxcAR8Xb2igCfWM1B
> Ie8vbvu8csne7r6PHEmoLN0=
> =pCM6
> -----END PGP SIGNATURE-----
>
> --
> No virus found in this incoming message.
> Checked by AVG Anti-Virus.
> Version: 7.0.323 / Virus Database: 267.7.3/15 - Release Date:
> 14/6/2005
>
>
>
> --
> No virus found in this outgoing message.
> Checked by AVG Anti-Virus.
> Version: 7.0.323 / Virus Database: 267.7.3/15 - Release Date:
> 14/6/2005
>
>
> _______________________________________________
> WiFiDog mailing list
> WiFiDog at listes.ilesansfil.org
> http://listes.ilesansfil.org/cgi-bin/mailman/listinfo/wifidog
>
>
Philippe April
GnuPG http://key.philippeapril.com
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.4 (Darwin)
iD8DBQFCsFQqOq+Ep5Xn/aARAsnsAKCnd07fRw6AC1Mic02jiejuyoeQvQCfVPoY
MYSsKITBXzXDLF0yfB2VnoA=
=pb7S
-----END PGP SIGNATURE-----
More information about the WiFiDog
mailing list