[Wifidog] Problems with a new WifiDog setup

[Chris Poupart]

Benoit Grégoire wrote:
> On Thursday 09 December 2004 09:26, Chris Poupart wrote:
> 
<snip>
>>Library LAN: 192.168.1.0/24
>>WRT54G LAN: 192.168.0.0/24
>>WRT54G WAN IP: 192.168.1.2/24
> 
> 
> I think the problem is that you can't maquerade on the same subnet, since the 
> kernel won't know how to route packets.  Change the WAN subnet to 
> 192.168.2.0/24 and it should work.

I don't have control over the WAN interface (WAN being Wide Area Network
here... the connection that will be plugged into the library network).

Setup is like this:

[Library 192.168.1.0/24] <--> [router vlan1 192.168.1.2] <-NAT-> [router
br0 192.168.0.0/24] <--> [wifi clients]

The nating is happening between two different subnets: 192.168.1.0 and
192.168.0.0.  And like I said, without wifidog, the connection works
perfectly. :-/.

-- Chris

_______________________________________________
Wifidog mailing list
Wifidog at isf.waglo.com
http://isf.waglo.com/mailman/listinfo/wifidog_isf.waglo.com